
210 m² of mosaic for a steam room, hot and cold plunge pools and a relaxation lounge at a seaside spa in Nha Trang.
Illustrative image
- Scope
- Colour design, fabrication & laying of steam room, plunge pools, heated loungers
- Architect / Partner
- Gió Nồm Atelier for Nước Mây Spa
- Material
- 15 × 15 mm ceramic & iridescent glass mosaic, heat- and steam-rated epoxy
- Location
- Nha Trang · 2026
Nước Mây Spa · Nha Trang · 2026 · 210 m² · 560,000 ceramic & glass tesserae
Material thinking for real architecture
Nước Mây is a spa on the ground floor of a beachfront hotel on Trần Phú Street. The owner wanted guests to step in as if moving from midday sun into late afternoon. We wrapped the steam room in amber mosaic, gave the cold plunge pool a deep blue, and built the heated lounger plinths in honey-brown ceramic. Light comes only from low down, so every piece seems to glow softly.
Technical challenge
The steam room runs at 45°C and near 100% humidity for 12 hours a day. The vault curves in two directions, and the lounger plinths are heated from within.
Fabrication & site protocol
- The vault uses 15 mm trapezoid-cut pieces to follow the double curve, never whole sheets.
- Waterproofing membrane and steam-rated epoxy from one system, tested with 21 days of steam on a sample board.
- Heated plinths leave expansion space around the heating cables, with flexible joints at the edges.
- Hot and cold pools share one palette with the gold-to-blue ratio reversed.
- Result: after 9 months of operation, no cracks and no discoloured joints.
Year
2026
Area
210 m²
Tesserae
560,000
Location
Nha Trang
Approach
One palette moving from amber to blue, with low light so the ceramic seems to glow. Every material tested in real steam before the first piece was cut.
Result
Weekends were fully booked from the first month. The steam room is the most-added service.
Palette
Amber
#C98B2B
Honey
#8A5A2B
Iridescent gold
#E3B341
Cold-pool blue
#1B2BFF
Moss
#5E8C3A
“Guests go quiet the moment they enter the steam room. Nobody needs reminding to whisper.”
“Hiệp Thủy insisted on a 21-day steam test. It felt slow then. Now it feels worth it.”
Specifications
- Scope
- Steam room, hot pool, cold pool, 6 heated loungers
- Surface area
- 210 m²
- Tesserae
- ≈ 560,000
- Tessera size
- 15 × 15 mm; trapezoid cuts on the vault
- Bonding system
- Waterproof membrane + steam-rated epoxy
- Duration
- 17 weeks
Timeline
- 01Design & 21-day steam test5 weeks
- 02Workshop fabrication6 weeks
- 03Waterproofing & laying5 weeks
- 04Heat test & handover1 week
Team
- 1 colour designer
- 1 waterproofing engineer
- 7 workshop cutters
- 8 site tilers
Planning a similar architectural space?
Share your surface area, environment, and target schedule to receive glazed sample boards and technical guidance.
